![PROTOFORM P63 190MM PRO LIGHT WEIGHT CLEAR TOURING CAR BODY - PR1580-20](/assets/thumb/PR1580-20.jpg?20240816202433)
+ More
PROTOFORM P63 190MM LIGHT WEIGHT CLEAR TOURING CAR BODY - PR1580-25
Introducing PROTOform's latest aerodynamic solution for high-competition 1/10 Electric Touring Car Racing, the P63.
This ultra high-downforce, super low-CG aerodynamic body shell was designed with the racer in mind, catering to today's insanely fast 190mm sedans. P63 is packed with updated features for outstanding performance on the track and ease of mounting while preparing to dominate the competition.
Modern Aerodynamic Features:
- Radical high-downforce design with a sloped hood and cab-forward layout
- Stiffening hood ribs for low deflection in ultra-light weights
- Recessed trunk section for low CG and extra stiffness
- Sculpted side door panels for increased side-bite
- High flow rear bumper area for reduced aero drag
The P63 also features the easiest mounting of any PROTOform body yet. Returning are PROTOform's signature Mounting Marks inside the front wheel arches, allowing you to choose your body positions in 2mm increments up to +8mm. In addition are markings on the hood, decklid, and rear bumper to easily line up your body posts no matter what chassis or rear body post configuration (vertical or horizontal) you prefer.
This body is designed to meet Global Body Spec rules and is made in the USA from high-quality, super-durable polycarbonate. It's available in three weights: X-Lite (0.4mm, for expert drivers only), Pro-Lite (0.5mm, a good all-around option), and Light Weight (0.65, for novice drivers or windy outdoor conditions). Included with the P63 are our convenient plastic wing buttons and under-wing "nuts", with M3 mounting screws. A stylish decal sheet, window masks, and overspray film complete the package.
Features:
- Aggressive High-downforce, Low-CG Design
- Stiffening Contours Throughout the Design
- Recessed trunk section for low CG and extra stiffness
- High Flow Rear Bumper
- Easy to Mount
- Made in the USA
Whats Included:
- (1) Clear P63 Body
- (2) Wing Buttons
- (2) Under-wing Nuts
- (2) M3 x 6 Black Screws
- (1) Decal Sheet
- (1) Window Masks
- (1) Paint-then-peel Overspray Film
Specs:
Length: | 16.7" (424 mm) | |
Width: | 7.53" (191.5 mm) | |
Height: | 4.53" (115 mm) | |
Wheelbase: | 10.0" (255 mm) - 10.2" (258 mm) |
SKU | PR1580-25 |
Brand | PROTOFORM |
Help other RC Hobbyland users shop smarter by writing reviews for products you have purchased.
Write A ReviewPROTOFORM P63 190MM LIGHT WEIGHT CLEAR TOURING CAR BODY - PR1580-25
or payments of $0.00 with
Info
PROTOFORM P63 190MM LIGHT WEIGHT CLEAR TOURING CAR BODY - PR1580-25
Introducing PROTOform's latest aerodynamic solution for high-competition 1/10 Electric Touring Car Racing, the P63.
This ultra high-downforce, super low-CG aerodynamic body shell was designed with the racer in mind, catering to today's insanely fast 190mm sedans. P63 is packed with updated features for outstanding performance on the track and ease of mounting while preparing to dominate the competition.
Modern Aerodynamic Features:
- Radical high-downforce design with a sloped hood and cab-forward layout
- Stiffening hood ribs for low deflection in ultra-light weights
- Recessed trunk section for low CG and extra stiffness
- Sculpted side door panels for increased side-bite
- High flow rear bumper area for reduced aero drag
The P63 also features the easiest mounting of any PROTOform body yet. Returning are PROTOform's signature Mounting Marks inside the front wheel arches, allowing you to choose your body positions in 2mm increments up to +8mm. In addition are markings on the hood, decklid, and rear bumper to easily line up your body posts no matter what chassis or rear body post configuration (vertical or horizontal) you prefer.
This body is designed to meet Global Body Spec rules and is made in the USA from high-quality, super-durable polycarbonate. It's available in three weights: X-Lite (0.4mm, for expert drivers only), Pro-Lite (0.5mm, a good all-around option), and Light Weight (0.65, for novice drivers or windy outdoor conditions). Included with the P63 are our convenient plastic wing buttons and under-wing "nuts", with M3 mounting screws. A stylish decal sheet, window masks, and overspray film complete the package.
Features:
- Aggressive High-downforce, Low-CG Design
- Stiffening Contours Throughout the Design
- Recessed trunk section for low CG and extra stiffness
- High Flow Rear Bumper
- Easy to Mount
- Made in the USA
Whats Included:
- (1) Clear P63 Body
- (2) Wing Buttons
- (2) Under-wing Nuts
- (2) M3 x 6 Black Screws
- (1) Decal Sheet
- (1) Window Masks
- (1) Paint-then-peel Overspray Film
Specs:
Length: | 16.7" (424 mm) | |
Width: | 7.53" (191.5 mm) | |
Height: | 4.53" (115 mm) | |
Wheelbase: | 10.0" (255 mm) - 10.2" (258 mm) |
SKU | PR1580-25 |
Brand | PROTOFORM |
Help other RC Hobbyland users shop smarter by writing reviews for products you have purchased.
Write A ReviewIn Stock
Out of Stock
Stock Located at Warehouse may require an additional 1-3 business days processing time before being dispatched. We aim to ensure that you receive your orders as quickly as possible.
$0.00